Slips, trips, and falls are some of the worst yet most common type of office injuries in the workplace, but they are also the easiest to correct.

If you feel yourself falling, try to hit on your shoulder and roll. You are most likely to absorb more of this impact than falling straight. Don’t reach out with a hand or arm to break your fall, as it may result in a broken limb or hand.

• Tripping over open drawers or file drawers
• Tripping over electrical cords or wires that run across hallways
• Tripping over loose carpet or broken tiles or concrete
• Tripping over objects stored in a hallway, walkway or other areas of high traffic
• Tripping because of poor lighting
• Tripping over non-secure mats and rugs

An office environment is considered to be one of the safest work environments, therefore to ensure a safe work environment; each individual must employ common sense, know physical limitations, display an attentive attitude towards their surroundings, and become aware of applicable compliance codes.

 

Safety Training Services, Inc. can help! Whether its general office safety training topics like OSHA-compliance training (OSHA-10 General Industry), safety auditing or even rescue serices available to your company, contact us to find out how we can become your all-inclusive safety company!

Here's a great compiled list of possible solutions for prevention. Some should be obvious, but ignored:

• Keep walkways and stairs clear of scrap and debris
• Coiling up extension cords, lines, and hoses when not in use
• Keeping electrical and other wires out of the way
• Wearing lug soles in icy weather
• Clearing parking lots, stairs, and walkways in snowy weather
• Using salt/sand as needed
• Where wet or potentially wet working conditions, maintain proper drainage and provide false floors, platforms, nonslip mats or floor surfaces, or other dry standing places (where practicable)
• Create nonslip surfaces in slippery areas by using no-skid waxes and/or grit-coated products
• Use slip-resistant footwear
• If a floor or working surface becomes wet, clean promptly and frequently
• Use/provide warning signs for wet floors
• Power/electrical cords that must cross walkways/aisles should be taped down (it is preferable to avoid this entirely by using floor plugs, if possible)
• Walkways/aisles should be kept clear at all times and should be wide enough for easy movement
• Carpet bulges or bunched up areas of carpet should be re-laid or stretched to prevent tripping
• Keep cabinets/drawers closed
• Eliminate clutter, obstructed work areas, and uneven floor surfaces
• Good lighting should be provided for all halls and stairwells, especially at night
• Stairs should have proper handrails and treads/risers should be maintained with slip-resistant surfaces, if possible
• Use handrails on stairs, don't run, and request help managing bulky loads. You must have an unobstructed view of the stairs
• Elevated storage and work surfaces should have guardrails, toe boards, and a permanent means of access
• Floor drains, pits, or any other floor opening should be covered or protected with guardrails
• Ladders should be properly maintained and have evenly spaced rungs and nonslip safety feet to reach items.
• Stools, chairs, boxes are NOT substitutes for ladders!
• Employees should be properly trained in the safe use of ladders

Ergonomics in the workplace

Having a comfortable work environment promotes a healthy physical and mental lifestyle. Adapting the workplace to you as a worker is the goal of an ergonomics program. But what really is "ergonomics?" It is a term often used and often misunderstood.

Ergonomics (according to Merriam-Webster's Dictionary) is "an applied science concerned with designing and arranging things people use so that the people and things interact most efficiently and safely." Ergonomics aims to improve the practicality, efficiency, and safety of a person working with a single machine or device (e.g., using a telephone, driving a car, or operating a computer terminal).

You should set up your workspace into THREE zones:

1. Primary Zone - This will be all the items you use on a very regular basis. This is the distance from your elbow to your hand. Such items may include your keyboard, mouse, and a notepad.
2. Secondary Zone - These are the items within your arm's reach. Position the items that you use often but not as frequently as the ones in your primary zone. What do you use periodically? Maybe its your phone, calculator, and some trays for paperwork.
3. Reference Zone - This is for your least-often used items. This zone is outside your arm's reach. Could be whatever you personally use least, it might be a utensil cup, plant(s), clock or even photos.

Ergonomics includes adjustments to your "body" as well. Listed below is 10 things to adjust, if necessary, to "you" in order to enhance your comfort at in your workplace.

So what do you DO about it? Its 2012, so chances are, computers are not going anywere anytime soon so here are some tips to help avoid eye strain at the computer:

• Blink more! We blink only 1/5th as much looking at a computer monitor as reading a newspaper. Try lowering your monitor so you are looking down, in order to help promote this.
• Move your monitor back a little bit. Our eyes are adapted for distance vision. Yet, most office work is done close to our eyes. Compensate for this by moving your chair periodically or adjust the distance/height of your monitor.
• Have a bigger monitor? Try increasing the size of your font/images. And of course, move back further from the screen.
• Try moving documents/items on your screen to different sides. Right eye dominant? Left eye? Try moving your email/documents to the left or the right and see if that is more comfortable for you.
• What about after all these tips, you still seem to have some discomfort? Try some glasses or seeing an eye care specialist. Seriously, its not the 70's/80's anymore, that stigma of the nerdy kid with glasses is gone! Get a sweet pair for the sole purpose of reading/working with computer monitors or similar devices. I am wearing mine as I type this, but use them generally just for this purpose and take them off when not working.

Fluorescent lights?	Harsh, excessively bright. Causes eye strains and glare.
Too little lighting?	Eye strain with paper documents, "gloomy" work atmosphere.
Windows?	Can cause lighting/glare problems, but given the choice most people would probably prefer having natural light and a view.
Direct Sunlight?	Not adjustable, unfortunately. Can be much brighter then what is actually needed.

Improving lighting has many benefits. It can reduce glare, increase work productivity and quality, and save on energy! Lighting should be lower then that for reading (many due to the computer monitor giving off its own light). The best way to optimize light levels should be to set a low level overall (overhead/indirect lighting), and use task lighting for situational use (desk lamps, undercabinet lights, etc.). 

Its pretty simple actually, too high of a temperature cause fatigue and uncomfortablity which leads to slumping & slouching. Awkward postures are too be avoided, as they are bad for your health. Too cold of a temperature can lead to muscle tension, increased risk for tendinitis, and other such health risks/issues. Humidity also falls into this discussion, seeing as too low a level can cause dry skin and reduced snsation in your fingertips (increasing the amount of force necessary for various tasks). Too much humidity can make your environment feel "stuffy" and the temperature seems higher than it actually is. Humidity also has an effect on actual or perceived indoor air quality.

Noise usually is not an issue as far as being damaging to our hearing in an office environment, but the fact that it can be darn distracting to some makes it potentially devastating to worker productivity and/or performance. I can go on and on (I probably will later in another blog specifically geared towards noise in the workplace) but will cut to the important stuff for right now--what to DO when a noise problem arises!

• Reduce or eliminate at the source whenever possible.
• Maintain equipment to prevent noisy malfunctions.
• Isolate or enclose equipment that generates noise even when it's in good repair.
• Have conference rooms available for meetings and conversations.

If lifting is included in an employee's tasks, then the employer is obligated to teach the employee the best way to lift. You may choose to have safety training for your employees covering ergonomics and lifting limits. Ultimately employees should know how to properly lift, when to get help, and when to use mechanical means rather than manually lifting an object.

• Keep object close to the body, don't reach out for an object.
• Move slowly and purposefully, don't jerk or twist.
• Feet should be shoulder width apart.
• Lift with your legs, not your back!
• Keep the back in a neutral position, bending should be done at the hips and knees. Keep knees slightly bent, never locked straight.

Breaks are encouraged! They help workers with a few minutes of recovery from the mental and physical demands of their jobs. This doesn't mean I'm trying to telling you to be a slacker, but micro breaks (1-3 minutes every hour, or half hour even) has shown to reduce discomfort while improving productivity. Use this time to get something to drink, have a quick stretch or even do some light exercise.